Working...

Your Cart

  • Your cart is empty

Back


Viewing 1 - 24 of 121

Loading search results...

Convert?h=150&w=230

Ruger LC9

Ruger
9mm
This Ruger LC9 Conversion Kit includes a blued 9mm Luger barrel, slide assembly, 7+1 magazine, instruction manual, and instructions for the conversion. The kit allows the owner of a LC3801 or LC380CA to safely and reliably convert the .380 semi-auto pistols to fire 9mm Luger ammunition. NOTE: Does not fit LCP.
9mm
$262.99
Convert?h=150&w=230

Ruger 300 AAC Blackout Barrel

Ruger
300 AAC Blackout
This barrel kit contains an SR-556 Takedown cold hammer-forged carbonitrided barrel chambered in 300 AAC Blackout, featuring a 1:7 twist rate, threaded 5/8-24, with Ruger flash suppressor. The barrel is assembled with takedown extension and complete gas block assembly laser-engraved with caliber marking. This kit also includes two 300 BLK optimized 30-round magazines, laser-engraved with caliber marking.
300 AAC Blackout
$386.99
Convert?h=150&w=230

P-07 Kadet Adapter

CZ
22 Long Rifle (LR)
This P-07 Kadet Kit conversion kit is designed to swap onto current P-07s and older P-07 Duty pistols. It enables shooters to train using .22 LR ammo. With a 10-round magazine and fully reciprocating slide, function will be identical to the host pistol in factory form, just with ligther recoil and lower cost associated with its use. Included is two magazines.
22 Long Rifle (LR)
$254.99
Convert?h=150&w=230

Buttstock/Grip/Foregrip Combo

Daniel Defense
Daniel Defense's adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points. The buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks. This eliminates the need for a tensioning device or friction lock. The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear. Its buttpads come in two sizes: a thicker convex shape (0.8 ), and a thinner concave shape (0.5 ); designed to keep from snagging when shouldering the rifle. Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.
$109.00
Convert?h=150&w=230

Stock/Grip/Foregrip Combo

Daniel Defense
Daniel Defense's adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points. The buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks. This eliminates the need for a tensioning device or friction lock. The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear. Its buttpads come in two sizes: a thicker convex shape (0.8 ), and a thinner concave shape (0.5 ); designed to keep from snagging when shouldering the rifle. Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.
$109.00
Convert?h=150&w=230

Stock/Grip/Foregrip Combo

Daniel Defense
Daniel Defense's adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points. The buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks. This eliminates the need for a tensioning device or friction lock. The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear. Its buttpads come in two sizes: a thicker convex shape (0.8 ), and a thinner concave shape (0.5 ); designed to keep from snagging when shouldering the rifle. Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.
$109.00
Convert?h=150&w=230

Collapsible Buttstock

Daniel Defense
Daniel Defense adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points. The buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks. This eliminates the need for a tensioning device or friction lock. All of this results in a durable buttstock that will give the shooter a comfortable and repeatable cheek weld and unprecedented control of the firearm. The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear. The buttpads come in two sizes: a thicker convex shape (0.8 ), and a thinner concave shape (0.5 ); designed to keep from snagging when shouldering the rifle. Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.
$67.00
Convert?h=150&w=230

Collapsible Buttstock

Daniel Defense
Daniel Defense adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points. The buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks. This eliminates the need for a tensioning device or friction lock. All of this results in a durable buttstock that will give the shooter a comfortable and repeatable cheek weld and unprecedented control of the firearm. The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear. The buttpads come in two sizes: a thicker convex shape (0.8 ), and a thinner concave shape (0.5 ); designed to keep from snagging when shouldering the rifle. Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.
$67.00
Convert?h=150&w=230

Collapsible Stock

Daniel Defense
Daniel Defense adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points. The buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks. This eliminates the need for a tensioning device or friction lock. All of this results in a durable buttstock that will give the shooter a comfortable and repeatable cheek weld and unprecedented control of the firearm. The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear. The buttpads come in two sizes: a thicker convex shape (0.8 ), and a thinner concave shape (0.5 ); designed to keep from snagging when shouldering the rifle. Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.
$67.00
Convert?h=150&w=230

Pistol Grip

Daniel Defense
Daniel Defense's pistol grip is an improvement to the old standby A2. The grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel. This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. A soft touch overmolding section enhances grip, wet or dry.
$29.00
Convert?h=150&w=230

Pistol Grip Milspec+

Daniel Defense
The Daniel Defense pistol grip is an improvement to the old standby A2. Its designed with ergonomics controllability, and shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel. This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. Installation is simplified by the fact the integral trigger guard doesn t require a roll pin so there is a reduced chance of damaging the lower receiver. A soft touch over-molding section enhances grip, wet or dry.
$29.00
Convert?h=150&w=230

Pistol Grip Tornado Grey

Daniel Defense
Daniel Defense pistol grip is an improvement to the old standby A2. The grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel. This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. A soft touch overmolding section enhances grip, wet or dry.
$29.00
Convert?h=150&w=230

Glock 17

Silencerco
9mm
The Glock 17 threaded barrel from Silencer Co is a 4.48 inch replacement barrel made from 416R stainless steel. This barrel features a black finish along with a 1/2" x 28 RH thread pattern.
9mm
$178.99
Convert?h=150&w=230

Glock 34

Silencerco
9mm
The Glock 34 threaded barrel from Silencer Co is a 5.31 inch replacement barrel made from 416R stainless steel. This barrel features a black finish along with a 1/2" x 28 RH thread pattern.
9mm
$178.99
Convert?h=150&w=230

Glock 17L

Silencerco
9mm
The Glock 17L threaded barrel from Silencer Co is a 6.02 inch replacement barrel made from 416R stainless steel. This barrel features a black finish along with a 1/2" x 28 RH thread pattern.
9mm
$178.99
Convert?h=150&w=230

Glock 19

Silencerco
9mm
The Glock 19 threaded barrel from Silencer Co is a 4.01 inch replacement barrel made from 416R stainless steel. This barrel features a black finish along with a 1/2" x 28 RH thread pattern.
9mm
$178.99
Convert?h=150&w=230

Glock 21

Silencerco
45 Automatic Colt Pistol (ACP)
The Glock 21 threaded barrel from Silencer Co is a 4.6 inch replacement barrel made from 416R stainless steel. This barrel features a black finish along with a .578" x 28 RH thread pattern.
45 Automatic Colt Pistol (ACP)
$178.99
Convert?h=150&w=230

Sig P226

Silencerco
9mm
The Sig Sauer P226 threaded barrel from Silencer Co is a 4.4 inch replacement barrel made from 416R stainless steel. This barrel features a black finish along with a 1/2" x 28 RH thread pattern.
9mm
$178.99
Convert?h=150&w=230

Threaded Barrel

Silencerco
9mm
The Glock 26 threaded barrel from Silencer Co is a 3.42 inch replacement barrel made from 416R stainless steel. This barrel features a black finish along with a .578" x 28 RH thread pattern.
9mm
$178.99
Convert?h=150&w=230

Threaded Barrel

Silencerco
9mm
The HK VP9 threaded barrel from Silencer Co is a 4.09 inch replacement barrel made from 416R stainless steel. This barrel features a black finish along with a 1/2" x 28 RH thread pattern.
9mm
$178.99
Convert?h=150&w=230

Threaded Barrel

Silencerco
9mm
The Glock 43 threaded barrel from Silencer Co is a 3.39 inch replacement barrel made from 416R stainless steel. This barrel features a black finish along with a 1/2" x 28 RH thread pattern.
9mm
$219.99
Convert?h=150&w=230

Eclipse SMP w/1.5" E-Loop

Blade Tech Industries
The Eclipse mag pouches are designed to fit snug and tight to the body. They offer the ability to change belt widths as well as ride height. The fit is snug and secure when a mag is fully inserted. When the mag is drawn, the top half allows for a smooth quick draw as the retention is in the lower half. The tapered edge at the top allows for easy reholstering. The mag pouch comes with a natural curve to conform to your body. In addition, it is ambidextrous and allows for the magazine bullet orientation to face both forward and back.
$21.24
Convert?h=150&w=230

Eclipse SMP

Blade Tech Industries
The Eclipse mag pouches are designed to fit snug and tight to the body. They offer the ability to change belt widths as well as ride height. The fit is snug and secure when a mag is fully inserted. When the mag is drawn, the top half allows for a smooth quick draw as the retention is in the lower half. The tapered edge at the top allows for easy reholstering. The mag pouch comes with a natural curve to conform to your body. In addition, it is ambidextrous and allows for the magazine bullet orientation to face both forward and back.
$21.24
Convert?h=150&w=230

Eclipse SMP w/1.5" E-Loop

Blade Tech Industries
The Eclipse mag pouches are designed to fit snug and tight to the body. They offer the ability to change belt widths as well as ride height. The fit is snug and secure when a mag is fully inserted. When the mag is drawn, the top half allows for a smooth quick draw as the retention is in the lower half. The tapered edge at the top allows for easy reholstering. The mag pouch comes with a natural curve to conform to your body. In addition, it is ambidextrous and allows for the magazine bullet orientation to face both forward and back.
$21.24